Hyper-V dont want to start in HP dc5750

hi

i trying test drive hyper-v in hp dc5750 sff 4gb ram.

i know not server, have been running w2k3 server virtual server 2005sp1 , combination

is great when want low cost, set of 10 server works test/demo environment...

 

when trying start guest system following error...

 

 

[window title]
hyper-v manager

[main instruction]
an error occurred while attempting change state of virtual machine lill-xxxxx.

[content]
'lill-xxxxx' failed initialize.

the virtual machine not started because hypervisor not running.

[expanded information]
'lill-xxxxx' failed initialize. (vmid 5cdfe3ec-f551-4625-acd4-44c8b880e0a8)

the virtual machine not started because hypervisor not running.  following actions may resolve problem:

1) verify processor of physical computer has supported version of hardware-assisted virtualization.

2) verify hardware-assisted virtualization , hardware-assisted data execution protection enabled in bios of physical computer.  (if edit bios enable either setting, must turn off power physical computer , turn on.  resetting physical computer not sufficient.)

3) if have made changes boot configuration data store, review these changes ensure hypervisor configured launch automatically.

 

hide details  [close]

 

 

hardware assisted virtualization is enable in bios

dep enable in bios

boot configuration data store, new installed machine, , havent done settings it.

localizing, machine installed english default.

kb949219, installed

 

securable listing have 64 maximum bit length, dep yes, hardware virtualization yes

 

 

below can find dump cpu-z

processors information
------------------------------------------------------------------------------------
processor 1 (id = 0)
number of cores  2 (max 2)
number of threads 2 (max 2)
name   amd athlon 64 x2 4400+
codename  brisbane
specification  amd athlon(tm) 64 x2 dual core processor 4400+
package   socket am2 (940)
cpuid   f.b.1
extended cpuid  f.6b
brand id  4
core stepping  bh-g1
technology  65 nm
core speed  2194.8 mhz (11.0 x 199.5 mhz)
ht link speed  997.6 mhz
stock frequency  2300 mhz
instructions sets mmx (+), 3dnow! (+), sse, sse2, sse3, x86-64
l1 data cache  2 x 64 kbytes, 2-way set associative, 64-byte line size
l1 instruction cache 2 x 64 kbytes, 2-way set associative, 64-byte line size
l2 cache  2 x 512 kbytes, 16-way set associative, 64-byte line size
fid/vid control  yes
max fid   11.5x
max vid   1.350 v
features  xd, vt
k8 thermal sensor yes
k8 revision id  6.0
attached device  pci device @ bus 0, device 24, function 0
attached device  pci device @ bus 0, device 24, function 1
attached device  pci device @ bus 0, device 24, function 2
attached device  pci device @ bus 0, device 24, function 3

chipset
------------------------------------------------------------------------------

northbridge  ati xpress 200 (rs480) rev. 10
southbridge  ati sb600 rev. 00
memory type  ddr2
memory size  4096 mbytes
channels  single
memory frequency 313.5 mhz (cpu/7)
cas#   5.0
ras# cas#  5
ras# precharge  5
cycle time (tras) 15
bank cycle time (trc) 21
command rate  2t

monitoring
------------------------------------------------------------------------------

mainboard model  0a64h (0x143 - 0x25080)

lpcio
-----------------------------------------------------
vendor   smsc
vendor id  0x55
chip id   0x8c
config mode i/o address 0x2e

dmi bios
--------
 vendor  hewlett-packard
 version  786e3 v02.31
 date  10/09/2007

dmi system information
----------------------
 manufacturer hewlett-packard
 product  hp compaq dc5750 small form factor
 version  unknown
 serial  xxxxxxxxx
 uuid  xxxxxxxx-2fd5dc11-bbda0b24-xxxxxxxx

dmi baseboard
-------------
 vendor  hewlett-packard
 model  0a64h
 revision unknown
 serial  xxxxxxxxx

dmi system enclosure
--------------------
 manufacturer hewlett-packard
 chassis type low profile desktop
 chassis serial xxxxxxxx

dmi processor
-------------
 manufacturer amd
 model  amd athlon(tm) 64 x2 dual core processor 4400+
 clock speed 2300.0mhz
 fsb speed 1000.0mhz
 multiplier 2.5x

 

 

best regards

 

daniel lill

daniel,

 

have read of post , comments , confirm each of requirements met , turned on in bios , bios latest revision.

 

cheers,

 

stephen edgar

 

Windows Server  >  Hyper-V